In the bathroom , the faucet is also very important , so we can not ignore the faucet maintenance work.

1 every month or so , wipe the faucet with wax , the surface of the hole plating layer can be sealed to prevent moisture or corrosive gases run into .

2 can be coated with a soft cloth to clean the surface of the faucet a little toothpaste , and then rinse with water . But do not use alkaline cleaners or steel ball to wipe , to avoid damage to the plating surface .

3 single- handle faucet in the process of opening and closing movements are not too fast ; Also, do not double- handle faucet off too rigid , otherwise it would stop cock off , causing the water forever, unable to turn off the switch .

4 located at the outlet of the frothing device of the leader , often because of the quality problem occurs such a small amount of water or unstable , this may be because the foam is clogged by debris , the foam can be screwed Used needles to remove water or heteroaryl matter .

5 water hose down regularly to check if it is found to be replaced immediately cracking phenomenon , so as to ensure that does not affect the life of the faucet .

In fact , after used for some time , we should be inspected and cleaned on tap , so as not to damage the inconvenience .