NEWS

Maintenance and cleaning of shower faucets

2022-07-30 10:25:45 Views: 3826
Keyword: Shower Faucet Classical Faucet Kaiping Ase Sanitary Ware Factory

The shower faucet is the water valve of the water pipe, which is opened or closed by the rotary device to control the flow of cold and hot water. How to clean the shower faucet?

 

1. The surface of the faucet should be gently wiped with a soft cloth (without impurities) dipped in detergent. Avoid using wire balls or scouring pads with hard particles. In addition, do not hit with hard objects so as to bruise the surface of the faucet.

 

2. Use the following cleaners to remove rough masks and buildup: mild liquid glass cleaner, pure liquid glass cleaner, acid-free, non-abrasive soft liquid or fully dissolving powder, non-abrasive solution polish.

 

3. Never use any abrasive cleaners, cloths or paper cloths; never use any acid-containing cleaners, polishing abrasives or rough cleaners.

 

4. Under the condition that the water pressure is not lower than 0.02mpa (ie 0.2kgf/cm2), after a period of use, if it is found that the water output decreases, or even the water heater is turned off, it can be lighted at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally return to normal.

 

 

Maintenance of shower faucets

 

1. Before installing the faucet, it is necessary to rinse with water, wash the sediment and impurities in the water pipe, go out the debris in the installation hole, and check that the accessories in the box are not mixed with impurities, and the ceramic spool may be worn or worn.

 

2. Use a soft cloth to apply toothpaste to clean the surface, then clean the surface with water. Do not use alkaline cleaners or wipe with scouring pads or steel balls to avoid damage to the electroplating surface.

 

3. The single-handle faucet should be opened and closed slowly during use; the double-handled faucet should not be closed too tightly, otherwise the water stopper will fall off, causing the problem that it cannot be closed and the water cannot be stopped.

 

Kaiping Yashi Sanitary Ware Factory was established in 2000, China's sanitary ware production base - Shuikou Town, Kaiping City. Our factory is a manufacturer of high-quality classical faucets, classical shower heads, copper basins, bathroom accessories and other bathroom accessories.

 

(Part of the material on this website comes from the Internet. If the information displayed on this website infringes your copyright or other legitimate rights and interests, please notify us in time, and this website will be deleted in time.)